East Valley Garage Floors
Epoxy Garage Floor Coating in Mesa, AZ
Mesa has newer homes in Eastmark and slabs that have been around since the 1970s. Either way, a local installer can look at your garage and quote an epoxy or polyaspartic floor that fits it.
- No cost to request a quote
- We name the installer up front
- Check their license at roc.az.gov
Older Mesa slabs and the cracks that come with them
Plenty of Mesa homes date to the 1970s and 80s, and their garage slabs often have settlement cracks, chipped control joints and patches from past repairs.
Some East Valley soils contain clay that swells when wet and shrinks as it dries, and that slow movement is one of several reasons slabs crack. Filled cracks are hard to spot under a flake floor. A crack that keeps getting wider is different, and it's worth having the installer look at it before you pay for a coating on top.
Newer homes in Eastmark and southeast Mesa
Eastmark and the neighborhoods around it went up over the last decade or so, and some homes there are still only a year or two old. An empty garage is the easiest one to coat, as long as the slab has dried out. Concrete gives off moisture for months after it's poured, and that moisture pushing up from below is a common reason young coatings bubble.
A simple moisture test answers the question, so ask for one before you pick an install date.
Big garages in northeast Mesa
Out in Las Sendas and Red Mountain Ranch, many homes have three-car garages, extra-deep bays or room for a golf cart or boat. A deep bay for a boat or a golf cart stall adds floor area, and coatings are priced by the square foot. If a side room or a separate single bay should be part of the job, include it in your request and the installer can measure everything in one trip.
Our cost guide lists what East Valley installers publish, and one of those ranges comes from an installer who advertises in Mesa.
Where in Mesa
We take requests from across Mesa, from Eastmark and the Superstition Springs area to Las Sendas, Red Mountain Ranch and the older neighborhoods closer to downtown. Mesa covers a lot of ground, so a neighborhood name or ZIP code in the form helps us find an installer who works your side of town.
We also take requests in Queen Creek, San Tan Valley, Gilbert and Chandler.
Flake or solid color
Flake is the most common choice because it hides dust and small imperfections well. Solid colors look clean but show tire marks and dust more. Metallic floors are more decorative and take more skill. The systems section on our home page explains the differences.
Mesa garage floor coating FAQ
Can you coat a garage floor with cracks?
Usually, yes. Cracks are filled before coating. If a crack is still moving, it can show through again later, so ask the installer to take a look at it.
How long should I wait to coat a newer garage in Eastmark?
There's no fixed number. It depends on how the concrete was poured and how long it has had to dry. A moisture test is the way to know.
Do you cover Las Sendas and Red Mountain Ranch?
Yes. We take requests from anywhere in Mesa, including northeast Mesa.
Is metallic epoxy a good idea for a garage?
It can look great, but it shows scratches and tire marks more than flake. Many people choose flake for the garage and save metallic for a showroom look or an indoor space.
What does it cost to coat a garage in Mesa?
See our cost guide for the ranges installers publish, including one from a Mesa installer. Your quote depends on size, slab condition and the system you pick.
Request a Mesa quote
Call (520) 779-7575 or use the form. Share your neighborhood, the garage size and what the floor looks like now, especially any cracks.
- About a minute to fill out
- No street address needed yet
- A local installer follows up with a written quote